Who are we?

-
Hi, I am Anurag Chugh. I work at LARE
LARE is an Indian company working in the field of embedded electronics.
Our website is located at www.lare.in.

Here is a short description of what we do:

UC Micro Systems (www.ucmicrosys.com)
LARE is a "Services Only" Company and is a subsidiary of UC Micro Systems (www.ucmicrosys.com). UC Micro Systems manufactures and sells various products - mostly development tools for electronics engineers involved in developing embedded systems. The UNIPro Universal Programmers are the most popular product series sold by UC Micro Systems in India.

LARE Learning Center
LARE provides corporate and academic training solutions in the field of electronics. We do so in two ways: either by carrying out courses at out Learning Centers or at the client's venue. Our first "Learning Center" was inaugurated in April 2009 at Belapur, New Mumbai, India. We have a lot of resources here , which the students can make use of to get hands on experience developing latest technologies being used in latest consumer and industrial electronics.
Through these "Learning Centers" we in intend to fill in the gaps in knowledge which the student has acquired at college.
At college, the student might learn what a capacitor is and how it looks on paper. But when the student actually enters professional life, he/she finds that there are a million kinds of capacitors in millions of packages with many different parameters other than just the capacitance value. A 10 microfarad capacitor might be made of tantalum in a Case B Surface Mount form rated at 16 Volts or it might be cylindrical and a centimeter high with leads spaced 0.1 inches apart and rated at 25 Volts.
This tantalum capacitor might be used in a power supply section of a board sporting a multi-core IC with RISC microprocessor and a digital signal processor running Linux playing a full-HD movie from the SD card on a 17" LCD TV. Well if you want to know how to select a single capacitor from amongst a million and how to go about using it in developing hardware and software for systems as simple as a wrist watch or a calculator to those as complex as the kind used in the cellphones, this is the place to come.

LARE Research Center
The Research Center provides design services and technical support to all internal departments of LARE and UC Micro Systems. It's like the brain - The Fountainhead if you may - behind all the activities carried out at LARE. Whether its developing universal modular electronics blocks (UNIBlocks) for use in student projects/ professional prototypes or Hobbyist Kits (VishaKits) or even full fledged development tools (SDKs for UC Micro Systems) - Research Center does it all.

LARE Design Services
LARE Design Services provides solutions to develop products for external clients. The activities carried out at "Design Services" are similar to those at "Research Center" but catering to external clients. The main theme here is "System Integration". If you want the legacy equipment in you company to be updated using latest technologies like Ethernet, WiFi, Bluetooth then this is the place to come to. It doesn't matter what your product involve : LCDs, stepper motors, GPS, any kind of sensor - smoke or oxygen, hall effect or dirt, load cell or colour - we can definitely come up with a design as per your needs. Currently we are serving only Indian clients.

LARE Resource Center
Takes care of the sales and marketing of LARE Services and UC Micro Systems Products.
It also provides Technical Support to clients who have opted to buy services and products from us.

Visha Electronics Corporation (www.vishaworld.com)
Visha Electronics is a very well known components distributor based in Mumbai, India. Visha Electronics aids the LARE Resource Center in its Sales and Marketing activities.

Comments

Post a Comment

Popular posts from this blog

Replacing the current sense resistor in Portable Chargers/Power Banks for powering low power DIY projects.

-
Image
Mobile Phone/Tablet charging Power Banks can be used to power so many DIY projects. But if your project is low power and draws very little current, the power bank will auto turn off after a few seconds thinking that it isn't being used to charge gadget (because the current draw is very low). I need to figure out a way to hack one and locate and replace the current sense resistor with one of a higher value. Here is how I did it. This  told me that the resistor would be located on the return path (ground path) of the output USB connector. I promptly located the R100  SMD resistor in my iBall portable charger. The fact that this resistor was fatter (higher power dissipation rating) and that it was 0.1 ohms in value confirmed that this had to be the current sense resistor Original 0.1 ohms current sense resistor I measured the voltage across it when nothing was connected. It was zero volts and the portable charger turned off in a few seconds when nothing was being charg...
Read more

Interface USB Mouse to your Arduino using CH375B

-
Image
CH375B module. It is usually supplied with a 2 way jumper mounted on TXD and RXD pin. The TXD RXD pins are located next to the female USB receptacle. Please unmount the jumper before use. Get the following components: Arduino Nano  Male to female jumper wires  - 4 pieces USB Mouse CH375B module Download MeUsb.cpp and MeUsb.h from  https://github.com/xeecos/Me-USB-Host On your Windows computer which already has arduino installed, go to your documents folder. There you will find a folder called arduino and within that another folder called libraries. Inside this libraries folder create a new folder called "MeUsb" Place MeUsb.cpp and MeUsb.h in this folder In the arduino\libraries folder, create another folder called "SoftwareSerial_fix" And in this folder download and place SoftwareSerial_fix.cpp and SoftwareSerial_fix.h from the same link as above. Assemble the circuit on the bread board as follows: +5V of Arduino Nano to ...
Read more

Simple TCP client server sockets application using IPv6 and IPv6

-
Image
So here is a pair of programs demonstrating the use of sockets on Linux. The server program is run first. Then whenever the client program is run, it connects to the server on the specified port and they both exchange strings and terminate. TCP is used over IPv4. Simple_tcpserver_ipv4.c: # include < stdio.h > # include < stdlib.h > # include < unistd.h > # include < string.h > # include < sys/types.h > # include < sys/socket.h > # include < netinet/in.h > # include < netdb.h > # include < arpa/inet.h > void error ( char * msg ) { perror ( msg ) ; exit ( 1 ) ; } int main ( int argc , char * argv [ ] ) { int sockfd , newsockfd , portno ; socklen_t clilen ; char buffer [ 256 ] ; struct sockaddr_in serv_addr , cli_addr ; int n ; if ( argc < 2 ) { fprintf ( stderr , " Usage: %s \n " , argv [ 0 ] ) ; exit ( 0 ) ; } ...
Read more